Fujitsu 1FINITY L100 User Manual

Related Links
Blade and PIU
L100 Specicaons
L100 Blade LED Indicators
SFP Module
Install Blade in Housing
Remove Blade from Rack
Remove Blade from Housing
C-Band Fequencies and Wavelengths
2.2.1
Connector Descriptions
Table 18
Connector and Funcon
Connector Connector Type Locaon Funcon
C1…C9 LC with shuer Front panel Pass-through (hub) connecon to/from client port on
the L100 Blade of other ROADM degree or add/drop
connecon to/from the 4x16 splier/coupler edge
ports (E1…E4)
E1 LC with shuer Front panel Connecon to/from line ber
E-SC-E1 SFP cage populated with
Ethernet SFP module
Front panel 100 Mb/s or 1 Gb/s connecon to/from OSC port
Note: 100 Mb/s SFP port is used for interoperability
connecon to L130 Blade running with Release
19.1.1.
F-SC-E1 SFP cage populated with
OC-3 SFP module
Front panel 155 Mb/s connecon to/from OSC port
Note: SFP port is used for interoperability connecon
to FLASHWAVE 9500 MH ROADM.
LCN1 SFP cage Front panel 100Base-T/1000Base-T electrical or 1000Base-SX/
LX10/EX/ZX opcal connecon to DCN Cloud
Note: The LCN1 port cannot be used simultaneously
with the UTLP port.
LCN2 SFP cage Front panel 100Base-T/1000Base-T electrical or 1000Base-SX/
LX10/EX/ZX opcal connecon to DCN Cloud
Note: The LCN2 port cannot be used simultaneously
with the UTLP port.
Unit Description
L100 Blade
66
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only

Fujitsu 1FINITY L100 Specifications

General

Brand	Fujitsu
Model	1FINITY L100
Category	Server
Language	English