Fujitsu 1FINITY L100 User Manual

5.15
Verify Blade Setup
Step 1
Log on the Main blade through the blade LMP interface.
Step 2
Verify that each blade is congured as intended.
Command:
> show table eqpt shelf <shelfid>
Parameter Value Descripon
shelf-id <1...4> Shelf value for L100
<101,103,105,107> Shelf value for L130
<220> Shelf value for L200
<9> Shelf value for L140
Command Example:
> show table eqpt shelf 1
Output:
fujitsu@fujitsu % show eqpt shelf 1 slot 0 subslot 0 port C1
pluggableInterfaceType Client;
num-lanes 128;
admin-status up;
ains disabled;
remoteSrcPeerPort-id "";
remoteDestPeerPort-id "";
[ok][2021-05-12 09:44:03]
✓ This task is complete.
Initial System Turn Up
Verify Blade Setup
199
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only

Fujitsu 1FINITY L100 Specifications

General

Brand	Fujitsu
Model	1FINITY L100
Category	Server
Language	English