6. WEB FUNCTIONS
6-6
• "This number has already been registered": The number already exists.
9. Click the [OK] button. The Group screen is displayed with the new group.
How to edit a group
1) Display the Group screen.
2) Select the group number to edit, and click the [Edit] button.
3) Edit the group number, name or members.
4) Click the [Save] button.
5) Click the [OK] button.
How to delete a group
1) Display the Group screen.
2) Put a [9] in the checkbox beside the group number to delete. To delete all
group numbers, put a [9] in the checkbox beside [Number] to select all.
3) Click the [Delete] button.
4) Click [OK].
5) Click [OK] again to close the message window.
6.1.5 Access code settings
When making an outside call from a terminal of which the [Access] box of [Extension]
of [PBX settings] is checked, input of “access code” and “*” before the phone number
of the party to call is required.
How to register access code
Register the access code as follows:
1. Click [Settings] in the menu bar.
2. Click [PBX settings].
3. Click [Access code] to show the Access code register screen.
No. of registered access code/
No. of registerable access code
To Next Page
Loading...
Need help?
General
