To Next Page

To Previous Page

3-1

3. SETTINGS FOR HANDSET

This chapter describes the menus [Sound], [Display], [SMS], [Web], and [Settings].

Also described are system messages from connected equipment, list of connected

equipment, and how to display various information.

3.1 Sound Menu

The [Sound] menu sets options for internal and external phones, message notification

for SMS messages and system messages, key beep, and microphone volume.

1. At the idle screen, press the Enter key to show the main menu.

2. Press X to select the [Sound] icon, and press the Enter

key to show the [Sound] menu.

Note: The [Sound] menu can also be opened by press-

ing the key at the idle screen.

3.1.1 Notification sound setting

You can set the sound volume and ring pattern for internal and external phones and

notification for SMS messages and system messages.

How to set the volume

1. In the [Sound] menu, press either the 1, 2, 3, or 4 key for the following items:

1: External phone incoming notification volume

2: Internal phone incoming notification volume

3: SMS message notification volume

4: System message notification volume

2. Press 1 to select [Volume] to show the below-right figure.

3. Press S or T to adjust the volume level (0 - 7). Set to [0]

for no sound.

Note: Press the key to hear the ringtone at the se-

lected volume. Press the key again to stop the ring-

tone.

4. Press the Enter key.

5. Press the key to close the menu.

Furuno FELCOM 250 User Manual

Other manuals for Furuno FELCOM 250