Furuno FELCOM 250 User Manual

6. WEB FUNCTIONS
6-24
6.1.10 PPPoE settings
The FELCOM can connect (dial-up connection) to the internet via PPPoE. With the
Web software and PC set up for PPPoE, the dial-up application directly controls con-
nection and disconnection of the data line. (It is not necessary to boot the Web soft-
ware to connect to the internet.) The PPPoE settings must be done by the network
administrator.
How to set PPPoE session
Click [Settings], [Network settings], [PPPoE] and [Session settings] to show the [PP-
PoE/Session settings] window.
Entry screen
Item Description
Delete button Delete the item having a checkmark [9]. A session cannot be de-
leted during PS*. *PS=Packet Switching
Add session button Create a new session. Up to three sessions can be created. The
creation screen appears.
Session Display session names.
APN Display connection destinations. (If connection destination is reg-
istered in the SIM card: “(SIM) connection destination” appears.
Global IP • Data connection in use: Global IP address is shown.
• Not connected: “---” appears.
Settings button Show the session setting screen. The session setting screen has
six types of setting screens. (Session can be registered to each
screen.)
Item Description
Session name Enter session name.
Username for PPPoE
Enter user name
*1
for PPPoE. Use ASCII characters other
than space, ”, . Maximum of 20 characters.
Password for PPPoE
Enter password
*1
for PPPoE. Use ASCII characters other
than space, ”, . Maximum of 20 characters.
No. of registrations/No. of registrations available

Furuno FELCOM 250 Specifications

General

Brand	Furuno
Model	FELCOM 250
Category	Marine GPS System
Language	English