6. WEB FUNCTIONS
6-8
6.1.6 PBX settings
How to set the ring duration time
Set the ring duration time of the terminal checked (9) in the [V1] (or [F1]) box of the
PBX settings/ Extension screen. (Not available for the multi voice and the extension.)
1. Click [Settings] in the menu bar.
2. Click [PBX settings].
3. Click [General settings] to show the [PBX settings / General settings] window.
4. Enter the ring duration time (0-99 seconds) in the [Voice] or [Fax] box. When the
ring duration time has passed with no response of the terminal checked (9) in the
[V1] (or [F1]) box of the PBX settings/ Extension screen, the terminal checked in
the [V2] (or [F2]) rings. If the ring duration time is “0”, the terminal checked in the
[V2] (or [F2]) does not ring.
Note: The ring duration time may change depends on the Inmarsat settings.
5. Click the [Apply] button. The message "Setting Completed." appears.
6. Click the [OK] button to erase the message.
How to set the automatic timeout function
The automatic timeout function automatically disconnects a voice call (with the excep-
tion of emergency call type 505) when the receiver is left unhung for the specified
number of minutes. This feature is useful for prevent unwanted charges because the
phone is left off hook.
1. Click [Settings] in the menu bar.
2. Click [PBX settings].
3. Click [General setting] to show the setting window.
4. To enable the timeout feature, check [Enabled]. To disable this feature, clear the
check.
5. Enter the timeout (1-99 minutes) in the [Timeout] box.
6. Click the [Apply] button. The message "Setting Completed." appears.
7. Click the [OK] button to erase the message. The communication which has
passed specified time at step 5 is disconnected automatically.
To Next Page
Loading...
Need help?
General
