Furuno FELCOM 250 User Manual

1. BASIC OPERATION
1-13
2. Click [Data connection] in the sub menu to show the data connection display.
3. Click the [Connect] button of the service to use.
When connecting, the message "Now connecting..." is displayed. When connect-
ed, the message "***connection success." appears.
4. Click [OK] to close the message.
When connected to the internet, the connection list is displayed as shown below.
5. Open the desired application software and begin data communication.
How to disconnect from the internet
Do the following to disconnect from the internet:
1. Click [Main] in the menu bar.
2. Click [Data connection] to show the [Data connection] screen.
3. Click [Disconnect] for the services to disconnect. When disconnecting, the mes-
sage "Now disconnecting..." is displayed. When disconnected, the message
"***disconnection success." is displayed. (***: Service and application)
4. Click the [OK] button to close the message. The [Status] field displays "Not Con-
nected", the [Operation] button shows "Connect".
1.7 Password
Refer to the following table for information on passwords:
Password Use
Password
Update
Handset Operation
password
*1
Delete all items and display specific
menus.
Refer to
paragraph 3.5.4.
SMS pass-
word
*1, *2
When accessing SMS menu. Refer to
paragraph 6.1.13.
SIP password Authentication password for SIP server.
When you change the SIP password
you must also change the extension
line password to the same, by WEB
software.
Refer to
paragraph 3.5.3.

Furuno FELCOM 250 Specifications

General

Brand	Furuno
Model	FELCOM 250
Category	Marine GPS System
Language	English