Using Garmin Connect on Your Computer
The Garmin Express application connects your device
to your Garmin Connect account using a computer.
You can use the Garmin Express application to upload
your activity data to your Garmin Connect account
and to send data, such as workouts or training plans,
from the Garmin Connect website to your device. You
can also install device software updates and manage
your Connect IQ apps.
1 Connect the device to your computer using
the USB cable.
2
Go to
Garmin.com.sg/express
.
3 Download and install the Garmin Express
application.
4 Open the Garmin Express application, and select
Add Device.
5 Follow the on-screen instructions.
Navigation
You can use the GPS navigation features on your
device to view your path on a map, save locations,
and find your way home.
Courses
You can send a course from your Garmin Connect
account to your device. After it is saved to your
device, you can navigate the course on your device.
You can follow a saved course simply because it is a
good route. For example, you can save and follow a
bike friendly commute to work.
You can also follow a saved course, trying to match
or exceed previously set performance goals. For
example, if the original course was completed in 30
minutes, you can race against a Virtual Partner trying
to complete the course in under 30 minutes.
Creating and Following a Course on Your Device
1 From the watch face, select START.
2 Select an activity.
3 Hold UP.
4 Select Navigation > Courses > Create New.
5 Enter a name for the course, and select
�
6 Select Add Location.
7 Select an option.
8 If necessary, repeat steps 4 and 5.
9 Select Done > Do Course.
Navigation information appears.
10 Select START to begin navigation.
Saving Your Location
You can save your current location to navigate back to it
later.
1 Hold LIGHT.
To Next Page
Loading...
Need help?
General
