Safety considerations
Vivid E80/E90/E95 – Service Manual 1-11
GC091052 Rev. 3
Mechanical safety
While the software install procedure is designed to preserve
data, you should save any patient data, images, system setups
to removable media or hardcopy before doing a software
upgrade.
Ultrasound probes are highly sensitive medical instruments
that can easily be damaged by improper handling. Use care
when handling and protect from damage when not in use. Do
not use a damaged or defective probe. Failure to follow these
precautions can result in serious injury and equipment
damage.
Never use a probe that has fallen to the floor. Even if it looks
OK, it may be damaged.
The Ultrasound system should not be moved with the Operator
I/O Panel extended. Move the operator i/o panel to its centered
and locked position. Lower the Operator I/O Panel as much as
possible before moving the Ultrasound system.
Prior to elevating Ultrasound system:
• verify that the floating Operating Panel is locked in its
lowest, parking position.
• verify that the front brake is locked and the Ultrasound
system is unable to swivel.
• verify that the rear brakes are in the locked position.
When the Ultrasound system is raised for a repair or moved
along any incline, use extreme caution since it may become
unstable and tip over.
Remember: If the front caster swivel lock is engaged for
transportation, pressing the release pedal once disengages the
swivel lock. You must depress the release pedal a second time
to engage the brake.
To Next Page
Loading...
Need help?
General
