gefran VDI100 Series User Manual

Note: PM motor tuning fault history (22-22) only stores the result of the last auto-tune performed .If auto-tuning was suc-
cessful or aborted no error will be displayed.
22-23: PM SLV acceleration time
PM SLV acceleration time is the acceleration time from static to I/F Mode Start Frequency Switching Point (22-
11).
Note: If occur error or vibration in PMSLV mode. Suggest to increase acceleration time. Please adjust acceleration time by
different application.
4.4.1. Annexed 1: Parameters’ default and upper limit values according to the inverter sizes
Models Size
Max. frequency (Hz)
in SLV when carrier
frequency ≤ 8 kHz
Max. frequency (Hz)
in SLV when carrier
frequency > 8 kHz
Display parameter
12-41
(Inverter temperature)
The initial value of
parameter 18-00 in
SLV/ SV (Slip compen-
sation at low speed)
Class 230 V
1007
1015
1 150 150 Sì 1.00
2022
2037
2055
2 150 150 Sì 1.00
3075 3 150 150 Sì 1.00
4110
4150
4185
4 110 110 Sì 1.00
Class 400 V
1007
1015
1022
1 150 150 Sì 1.00
2037
2055
2 150 150 Sì 1.00
3075
3110
3 150 150 Sì 1.00
3150
4150
4 110 110 Sì 1.00
4185
4220
4 100 100 Sì 1.00
5300
5370
5450
5550
5 100 80 Sì 0.70
6750
6900
6 100 80 N. 0.70
71100
71320
71600
7 100 80 N. 0.50
Models
The initial
value of
parameters
21-05 ~21-08
(Torque Limit)
The initial
value (s) of
parameter
20-08
(ASR
Filter Time)
The initial
value (V) of
parameter
08-02
(Stall Level in
Deceleration)
The initial
value (s)
of Accel. &
Decel
Max. carrier
in HD kHz
(SLV, Max. >
80Hz)
Portante
max. in HD
kHz
Max. carrier
in HD kHz
(others)
Parameter
11-59
(Gain of
preventing
oscillation)
Class 230 V
1007
200% 0,001 395 10,0
8 8 16 0,05
1015 8 8 16 0,05
2022
200% 0,001 395 10,0
8 8 16 0,05
2037 8 8 16 0,05
2055
200% 0,001 395 10,0
8 8 16 0,05
3075 8 8 16 0,05
VDI100 • Instruction manual 283

gefran VDI100 Series Specifications

General

Brand	gefran
Model	VDI100 Series
Category	Inverter
Language	English