13 - Maintenance Parameters
Code Parameter Name / Range
13-00 Inverter
Model Selection
Inverter model: 13-00 display Inverter model: 13-00 display
VDI100-1007-KBX-2T 201 VDI100-1007-KBX-4 401
VDI100-1015-KBX-2T 202 VDI100-1015-KBX-4 402
VDI100-2022-KBX-2T 203 VDI100-1022-KBX-4 403
VDI100-2037-KBX-2T 205 VDI100-2037-KBX-4 405
VDI100-2055-KBX-2T 208 VDI100-2055-KBX-4 408
VDI100-3075-KBX-2T 210 VDI100-3075-KBX-4 410
VDI100-4110-KBX-2T 215 VDI100-3110-KBX-4 415
VDI100-4150-KBX-2T 220 VDI100-4150-KBX-4 420
VDI100-4185-KBX-2T 225
VDI100-3150-KBX-4
VDI100-4185-KBX-4
425
VDI100-5220-KXX-2T 230 VDI100-4220-KBX-4 430
VDI100-5300-KBX-4 440
VDI100-5370-KXX-4 450
VDI100-5450-KXX-4 460
VDI100-5550-KXX-4 475
VDI100-6750-KXX-4 4100
VDI100-6900-KXX-4 4125
VDI100-71100-KXX-4 4150
VDI100-71320-KXX-4 4175
VDI100-71600-KXX-4 4215
Code Parameter Name / Range
13-01 Software version
----
13-02 Clear Cumulative Operation Hours
0: Disable to Clear Cumulative Operation Hours
1: Clear Cumulative Operation Hours
13-03 Cumulative operation hours 1
0~23 hours
13-04 Cumulative operation hours 2
0~65535 days
13-05 Selection of cumulative operation time
0: Accumulative operation time while power on
1: Accumulative operation time when it is operating.
13-05= 0: Inverter logs the time while the inverter is powered-up.
13-05= 1: Inverter logs the time when the inverter is running.
Code Parameter Name / Range
13-06 Parameters lock
0: Parameters are read-only except 13-06
and main frequency
1: User Defined Parameters
2: All parameters are writable
Note: Main frequency (reference) setting is 12-16. The value is equal to frequency setting of speed-stage 0 (05-01).
Code Parameter Name / Range
13-07 Parameter Lock key Code
00000~65535
VDI100 • Instruction manual
241
To Next Page
Loading...
Need help?
General