1 - Welcome
8
HC 8600 and HC 9600
About this Instruction Book
This instruction book is written for the use with the HARDI® HC 8600 and HC 9600 controllers respectively. Since most menus
are nearly identical for both, we have chosen to illustrate this book with HC 9600 illustrations. On the HC 9600 many menu
screens will appear as part of the screen (pop-up dialogue boxes), but will appear full screen on the HC 8600 controller.
Because of the physical size of controllers, some dialogue boxes will appear with a bit different layout on HC 8600, but with
same contents as the HC 9600 screen.
Differences between the Controllers
The controllers differ in the following:
• Display sizes
• Menu layouts
• Features available:
Display Features HC 8600 HC 9600
Display Size 8 in. 12 in.
Swipe Gesture Yes Yes
Coverage Mapping Yes Yes
Split Screen Not Available Yes
Data Logging Yes Yes
AutoSectionControl (AutoSwath) Yes Yes
Headlands Yes Yes
Multiple Product Control Yes Yes
Camera Support 4 4
AgFiniti Mobile Yes Yes
USB Port 1 2
Guidance & Steering
Lightbar Guidance Yes Yes
Mechanical Assisted Steering Yes Yes
Hydraulic Assisted Steering Yes Yes
GLIDE, SBAS (WAAS/EGNOS), TerraStar, RTK Yes Yes
SmartPath Yes Yes
Tramlines Yes Yes
StableLoc Yes Yes
Application Control
Liquid Product Application Control 10 sections 10 sections
ISOBUS Liquid Control Module 36 sections 36 sections
Variable Rate Application Yes Yes
Chemical Injection Yes Yes
Boom Height Control Yes Yes
Smart Report™ Not Available Yes
AutoSectionControl (AutoSwath) based on Previously Applied Maps Yes Yes
Container Sequencing Not Available Yes
Dry Product Application Control Yes Yes
Closed Loop Spinner Speed Control Yes Yes
Strip-Till Yes Yes
Air Seeder Support Yes Yes
OptRx® Crop Sensors Not Available Yes
Multiple Product Application (Liquid or Granular) up to 3 up to 8
ISOXML Data Export Yes Yes
ISOBUS
ISOBUS Universal Terminal Yes Yes
Task Controller Yes Yes
To Next Page
Loading...
Need help?
General
