Hardi HC 9600 User Manual

4 - System setup
141
Remote Support
To use remote support on the HC 8600/9600 display, the following requirements need to be met:
1. User account created at www.agfiniti.com.
2. Annual license purchased and active.
3. HC 8600/9600 display connected to internet source via Wi-Fi adapter.
4. Must be logged into AgFiniti account on HC 8600/9600 Display.
5. From www.agfiniti.com a user can remotely view the display.
Remote Support Pre-authorization
Pressing the remote support button will generate
a 10 digit code that can be verbally
communicated to remote viewer to initiate the
viewing session.
Remote Support Permissions Options
• Ask for Permissions
This selection will require the display user to grant remote user permission to view the display.
• Always Allow
Allows remote viewer to view display screens without display user having to give permissions.
Allow remote viewer access to view the display.
Deny remote viewer access to view the display.
When a remote view session has been initiated, the status bar at the top of the screen will turn from blue to green.
Harvest
Tillage
Planting
Application
Water
Management
Guidance
Remote Support
Contact the person you would like to allow to view
the display, and provide the following authorization
code:
00012-574EC
Remote Support
AgFiniti
Connection Management
Ask For Permission
Ask For Permission
Always Allow
Allow John Doe to remotely view the
display
Remote Support

Hardi HC 9600 Specifications

General

Brand	Hardi
Model	HC 9600
Category	Controller
Language	English