4 - System setup
103
Patterns are automatically saved when the vehicle turns for the first time. For more information see “AutoSave” on page 110.
÷
NOTE! On straight AB lines, if you complete a swath that is longer than the previous one, the display automatically
extends the guidance path for the following swaths.
New Pattern - Adaptive Curve
Use the Adaptive Curve pattern to follow gentle contours in the
field, or when you need to avoid obstacles (A). This pattern
provides guidance based on the last curve driven.
Select Pattern
System defaults pattern type to last used. Press the pattern icon to select a different pattern.
• Implement Width (from Implement Setup)
• Guidance Width input box
Press to accept. You will automatically return to the Map screen.
Create AB line using 2 points
• Press to mark point A.
A green ball appears on the map screen where point was placed.
• Button is grayed out until you drive a minimum of 100 feet (30 meters).
• Pause - Press to pause path during path creation.
• Resume - Press to resume path during path creation.
• Cancel - Press to cancel path during path creation.
• Press to mark point B. The AB line appears on the map screen and point B is marked with a red
ball.
÷
NOTE! Guidance extends beyond the end of curved swaths. This makes it possible to get LED guidance back onto the
swath if the vehicle drives past the end of a swath. The extended swath lines do not appear on screen.
To Next Page
Loading...
Need help?
General
