Hardi HC 9600 User Manual

5 - Operation
163
Headlands
Press the Headlands button on the Field tab to access the Headland Options screen.
μ
ATTENTION! A Field Boundary is required to create a headland.
μ
ATTENTION! For headland alarms to work, a guidance line must be loaded.
A. Enable Headlands: Use checkbox to turn
Headlands functionality on and off.
B. Add Headland
C. Load a Headland
D. Edit Headland
E. Alarm Settings
Active Area (F)
Add a Headland (B)
Press on Headlands Options screen.
Select Headland Type from drop-down box.
Work Area Headlands All
Field
Boundary
Headlands
Topo graphy
Headland Options
Enable Headlands
Active Area
All
Save
Product will be
applied to main
section of field.
AutoSwath will
turn off product
on headlands.
Product will be
applied to
headlands of field.
AutoSwath will
turn off product
on main section of
field.
AutoSwath will not
be affected by
headlands.

Hardi HC 9600 Specifications

General

Brand	Hardi
Model	HC 9600
Category	Controller
Language	English