Hardi HC 9600 User Manual

7 - Fault finding
186
HARDI® C2C and JobCom is powered On (B),
AutoTerrain/AutoHeight UC5 is loaded (A).
The system should be healthy and be fully
operational.
UT Alarms and Trouble Codes
If the display receives an active trouble code, the
“Universal Terminal Alarm” (A) will appear in the
Status bar at the top of the screen.
Press the to see the fault description in the UT
run screen.
A detailed description of the fault can be found in
the Fault finding chapter in the HARDI®
CONTROLLER ISOBUS VT Instruction book.
Volume rate Work rate
Prog. rate
Speed
Tank cont.
Volume rate
gal/acre
gal/acre
ac/hour
gal/acre
mph
gallon
Volume rate Prog. rate
PF bus -
Agitation
Voltmeter
gal/acre
gal/acre
Volt
Volt

Hardi HC 9600 Specifications

General

Brand	Hardi
Model	HC 9600
Category	Controller
Language	English