Hardi HC 9600 User Manual

5 - Operation
157
Press the selection box (A), showing the last used
configuration, to select Application Configuration
for creating a spray job.
Select sprayer configuration in the drop down
menu (B).
Only configurations with will work
properly:
The configuration can be loaded and is
detecting all modules setup in the
configuration.
μ
ATTENTION! Options are all configurations
previously created for the current display.
μ
ATTENTION! Select “Guidance” for Guidance
only.
A. Check the “Boom Height” option if
AutoTerrain/AutoHeight is applicable.
This will enable manage of the AutoHeight
from the Work Screen.
B. Press to confirm.
μ
ATTENTION! All Modules Detected:
Display is detecting the module.
Management Selection:
Press to create a new Growing
Season, Grower, Farm and Field. Or select
existing ones in the pull down menus.
μ
ATTENTION! The “Enable Management”
button is checked by default and requires a
Grower, Farm and Field to be entered before
proceeding.
Un-checking this button will allow the
operator to continue to next screen without
entering additional information on this
screen.
μ
ATTENTION! Grower, Farm and Field can also
be created in (Management
Setup).
Press to proceed to the next step.
JD 4630, HARDI COMMANDER
Operating Configuration
COMMANDER TERRA FORCE
ALPHA TWIN FORCE
JD 4630 NAVIGATOR DELTA FORCE
JD 4630, HARDI COMMANDER
SARITOR FORCE
Boom Height
Norac UC5 Module
Operating Configuration Selection
JD 4630, NAVIGATOR DELTA FORCE
Equipment Name
Vehicle
Implement
JD 4630
NAVIGATOR DELTA FORCE
Device Hardi
Hardi C2C Module
Container
Device
Main Tank
Boom Height
Boom Height
Growing Season
Management Selection
Grower
Farm
Field
Crop
Hardi North America
Hardi Farm
21
Enable Management

Hardi HC 9600 Specifications

General

Brand	Hardi
Model	HC 9600
Category	Controller
Language	English