4 - System setup
66
19. Automatic Swath Control options:
• Outside Boundary Option
Select one of the two options to determine system behavior when a section exits a field boundary.
• Coverage Option
In the Coverage Option area, you must choose between three options:
• Minimize Skip
Turns off the implement section after the entire section is fully inside your coverage area.
This prevents the possibility of skips.
• Minimize Overlap
Turns off the implement section when that section first enters your coverage area.
This prevents the possibility of overlaps.
• User Defined
Allows you to choose what percentage of the implement section is within the coverage area before that section
turns off. For example, if you choose 50%, then the section will switch off when half of it is within your coverage
area.
• Press “Look Ahead Settings” to edit settings.
Look-Ahead
Settings
Automatic Swath Control
Application
Outside Boundary Option
Keep Unchanged
Turn Section Off
Minimize Skip
Minimize Overlap
User Defined
Coverage Option
Planting
To Next Page
Loading...
Need help?
General
