Hitachi PH User Manual

3-37 ● Setting Character Height and Character Orientation
(2) Operating procedure
● Setting the character height to 90, character width to 10, character orientation to 1.
From the "Print description" screen, press Print spec .
The "Print specifications" screen then opens. (The maximum value for the print
start delay varies with the character size.)
1
Press 9 and 0 in sequence.
The character height is then set to 90.
2
Press charcter width.
The cursor then moves to the character width input field.
3
Press 0 , 1 , and 0 in sequence.
The character width is then set to 10.
4
Press character orientation.
The cursor then moves to the character orientation input field.
5
Press 1 .
Character orientation option 1 (ABC) is then selected.
● The same result is produced if you press Increment .
6
Press Apply .
7
Operations for modify-
ing the setting contents
(See Section 2.1.3,
Operations for modify-
ing the setting contents.
)
If the cursor is not
displayed, press
Show cursor .
Cursor will move to the
line you touched.
Cursor will move to the
line you touched.
Selected item on the
cursor-positioned line
can be changed by
touching.
Shut
down
Manual
Back
Show
cursor
←
→
Prev.
dis-
paly
Next
dis-
paly
Decre-
ment
Incre-
ment
123 456789
Print specifications Status: Ready
0
[ 5 ] (0-99)
Character width [ 0 0 0 ] (0-199)
Character orientation [ 0 ] (0: 1: ABC 2: 3: )
(Arrow: Printing direction) → ← ← →
Printing method 2 (1:single scan 2: )
8
Character height
Interlaced
ABC
Shut
down
Manual
Show
cursor
Prev.
dis-
paly
Next
dis-
paly
Print specifications Status: Ready
[ 0 ] (0-99)
Character width [ 0 0 0 ] (0-199)
Character orientation [ 0 ] (0: 1: ABC 2: 3: )
9
Character height
ABC
ABCABC
Shut
down
Manual
Apply
Prev.
dis-
paly
Next
dis-
paly
Print specifications Status: Ready
Character height [ 9 0 ] (0-99)
Character width [ 0 1 0 ] (0-199)
[ ] (0: ABC 1: 2: 3: )
(Arrow: Printing direction) → ← ← →
1
Character orientation
ABC
ABCABC
Shut
down
Manual
Apply
Prev.
dis-
paly
Next
dis-
paly
Print specifications Status: Ready
Character height [ 9 0 ] (0-99)
[ 1 0 ] (0-199)
Character orientation [ 0 ] (0: 1: ABC 2: 3: )
0
Character width
ABC
ABCABC
ABCABC
Press Back .
You are then returned to the “Print description” screen.
8

Hitachi PH Specifications

General

Brand	Hitachi
Model	PH
Category	Printer
Language	English