7-28 ● Circulation Filter Replacement
7.11 Circulation Filter Replacement
Perform it in a state in which the ink has been drained. The ink is not wasted if
performed simultaneously with the ink replacement.
Perform "7.5 Ink Replacement" and put it in the state of 6
(the state in which there is no ink within the circulation path).
1
Replace the circulation filter at the position shown below.
See "7.10 Recovery Filter Replacement" for the replacement
procedure.
2
Circulation filter
Open the "Parts usage time management" screen (the page
following the "Circulation control" screen), and set the used
time of the circulation filter to 0.
3
Back
Prev.
dis-
paly
Next
dis-
paly
Decre-
ment
Incre-
ment
123 4567890
Update log 2015.07.07 12:45
. .
Parts usage time mgmt. Status: Stop
Reset
Re-
cover
Com=0
Ink filter [ 0 0 0 0 0 ] Pump [ 0 0 0 0 0 ]
[ 0 0 0 0 ] Heating unit [ 0 0 0 0 0 ]
Makeup ink f. [ 0 0 0 0 0 ]
Air filter [ 0 0 0 0 0 ]
Recovery filter [ 0 0 0 0 0 ]
0
Circulation f.
(hours)
(hours)
To Next Page
Loading...
Need help?
General
