● Printing Characters 3-30
C
3.3.10 Printing with count multiplication function
The following describes count multiplication function, which allows printing of
multiplication result of predetermined value by count value.
(1) Overview
● Multiplication result of count value by count multiplier will be printed.
● Printing will be aligned to the left.
● Decimal part of multiplication result will be rounded off and adapted to the count
value place
● Zero suppression setting will be activated to the zero below decimal level.
(Example 1.230 →1.23)
● Fault "No print content" will be generated if digit number of integer part of
multiplication result is greater than that of input count character.
● Zero suppression setting will not be reflected if integer number was set to count
multiplier.
(2) Operating examples
Shown below is the operational procedure of when 0.3048 was input to count
multiplier and execute printing with feet to meter converted. (1 foot = 0.3048 m)
Display "Edit message" screen and input count character.
1
Display third screen of "Count conditions" and set 0.3048 to
Multiplier.
3
Edit message
Shut
down
Manual
Status: Ready
Back
Show
cursor
Insert
User
pat-
tern
Prev.
item
Next
item
Blank
123456789
[ ]
Zero-suppression [ 0 ] (0: 1:Enable )
[ . 3 0 4 8 ]
0
Count conditions Status: Ready
Prev.
dis-
paly
Next
dis-
paly
User
pat-
tern
ABC
.
123
Sign
.
0
Incre-
ment
Decre-
ment
Multiplier
Disable
CC
Arabic
Reset
. . . . .
.
. . . .
Press Calendar/Count .
The “Calendar/Count” screen then opens.
2
Russian
Greek
Accent
Calendar/CountArabic
Calendar/Count
DedicatedKana
Arabic
Keybord display has
been set to one of the
following settings:
“When KANA and
dedicated characters
can be input.”
(The “Arabic input” be
unable to do in “Simple
Chinese”.)
“When special
characters can be
input.”
To Next Page
Loading...
Need help?
General
