Honda 2004 CRF250X Service Manual

REAR WHEEL
REMOVAL
Be careful not to
damage the brake
pads with disc
Raise the rear wheel off the ground by pla ci ng a
workstand or equivalent under the engine .
loosen the axle nut.
Loosen th e drive chain adjuster lock nuts and turn
the adjusting bolts clockwise fully .
Remove the axle nut and washer .
Push the rear wheel forward to derail th e drive
chain
from the driven sprocket.
Remove the
axle, adjusting blo c ks and rear wheel.
Do not ope rate the brake pedal after removing the
rear wheel. To do so will cause difficulty in fining
the brake disc between the brake pads.
Remove the right and left side collars.
INSPECTION
AXLE
Set the axle on V-blocks and measure the runout .
Turn the axle and measure the runout using a dial
indicato r.
Actual runout is 1/2 of the total indicator reading.
SERVICE UMIT : 0.20 mm (0.008 in)
REAR WHEEL/SUSPENSION
14-7

Honda 2004 CRF250X Specifications

General

Brand	Honda
Model	2004 CRF250X
Category	Motorcycle
Language	English