Honda 2004 CRF250X Service Manual

MAINTENANCE
When using the
special tool, follow
the manufacwre"s
inStructiOn.
3-22
Measure the dr ive chain inner plate width.
SERVICE LIMIT : 13.4 mm (0.53 in)
If the measurement exceeds the servi ce limit ,
replace the chain.
(0
S ER VICE LIMIT ' 13.4 mm (0.53 in)
o (0
0)
Lubricate the drive chain with #80 - 90 gear oil or ~=================~
drive chain lubricant designed specifically for use LU BRI CATE
with O-ring chains. Wipe off the excess oil or chain
lubricant.
REPLACEMENT
#80 - 90 GEAR OIL OR
DRIVE CHAIN LUBRICANT
This motorcycle uses a drive chain with a staked ,-------------------,
master link.
Loosen the drive chain (page 3-21 ).
Assemble the special tool as shown.
TOOL :
Drive chain tool set 07HMH-MR10103 or
07HMH ·MR1010C
(U .S.A. only)
o
DRIVE C HA IN TOOL SET

Honda 2004 CRF250X Specifications

General

Brand	Honda
Model	2004 CRF250X
Category	Motorcycle
Language	English