Honda 2004 CRF250X Service Manual

OIL PUMP
DISASSEMBLY
Remove the following:
- Left crankcase cover (page 11 -4)
-
Flywheel (page 11 -5)
- Balancer (page 12-6)
Remove the oil pump driven gear and drive pin .
Remove
the engine from the frame (page 7-5),
Separate the left and right crankcase halves (page 12-7 ),
Remove the gasket and dowel pins.
Remove
the oil pump inner / outer rotor and shaft.
Remove the one-way valve.
INSPECTION
Check the oil pump driven gear for wea r or damage .
Check the oil pump shaft for wear or damage.
Check the one-way valve for wear or damage,
replace if necessary.
Check the reed valve for damage or fatigue, and
replace the one-way valve if necessary.
LUBRICATION SYSTEM
-
Oil PUMP DRIVEN GEAR PUMP SHAFT
\
QNE-\\'AYVALVE
4-7

Honda 2004 CRF250X Specifications

General

Brand	Honda
Model	2004 CRF250X
Category	Motorcycle
Language	English