Honda 2004 CRF250X Service Manual

REAR WHEEL/SUSPENSION
WHEEL BEARING
Turn the inner race of each bearing with your finger.
The bearings should turn smoothly and quietly .
Also check that th e bearing outer race fits tightly in
the hub.
Replace the wheel Remove and dis card the bearings if the races do nol
beanngs In pairs. turn smoothly . quietly, or if they fit loosely in the
hUb.
WHEEL RIM RUNOUT
WHEEL
BEARING
Check the rim runout by placing the wheel in a turn- r-------------- - ----,
14-8
ing stand.
Spin the wheel by hand, and read the runcut using a
dial indicator.
Actual
runout is 1/2 the indicator reading.
SERVICE LIMITS:
Radial: 2.0 mm (0 .08 Inl
Axial: 2.0 mm (0 .08 In)
Check the spokes and tighten any that are loose.
DISASSEMBLY
Remove the bolts , nut s and brake disc.
Remove the right
dust seal.
Remove the
driven sprocket bolts, nuts and wash-
ers.
Remove the driven sprocket.
Remove the
left dust seal.

Honda 2004 CRF250X Specifications

General

Brand	Honda
Model	2004 CRF250X
Category	Motorcycle
Language	English