Honda 2004 CRF250X Service Manual

MAINTENANCE
Inspect the wheel rims and spokes for damage .
Tighten
any loose spokes and rim locks to the speci-
fied torque .
TOOLS:
Spoke wrench , 6.1 mm
Spoke wrench , 6.6 mm
TORQUE:
07JMA·MR60100 or
07701·0020300 or
equivalent commer-
cially available in
U.S.A.
010MA ·KZ30100 or
equivalent commer·
cially available in
U.S.A.
SPOKE : 3.7 N'm (0 .38 kgf-m, 2.7 Ibl .ft)
RIM LOCK : 12 N'm 11 .2 kgf ·m, 9Ibf.ft)
STEERING HEAD BEARINGS
8e sure the control
cables do flor inter-
fere with handlebar
rotation .
3-34
Raise the front wheel off the gr ound by placing a
workstand or equivalent under the engine.
Check that the handlebar moves freely from side-to-
side.
If the handlebar moves unevenly, binds, or has ver-
tical movement, inspect the steering head bearings
(page 13 -38).
If excessive play h as developed, check the steering
stem
for cracks.

Honda 2004 CRF250X Specifications

General

Brand	Honda
Model	2004 CRF250X
Category	Motorcycle
Language	English