Honda 2004 CRF250X Service Manual

MAINTENANCE
BRAKE PEDAL HEIGHT
Adjust the brake pedal to the desired height by loos- . ----- - P-U-S-H- R-O-D ------ ---,
ening the lock nut and turning the push rod.
STANDARD HEIGHT: 79.6 mm (3 .13 in )
Tighten the lock nut to the specified to rque.
TORQUE: 5.9 N'm
(0 .6 kgf·m, 4.3 Ibf.ft)
LOCK NU T
11<>J---'
79.6
mm
(3.13
in)
HEADLIGHT AIM
Adjust the headlight beam vertically by turning the
adjusting screw on th e front visor.
CLUTCH SYSTEM
3-28
Measu re the clutch free play at the lever end.
FREE PLAY : 10 - 20 mm (3/8 - 13 /16 in)
10 -20 mm (3/8 - 13/16 in ~ I ~~Ii"'"f1t'~2.
Minor adjustments can be made at the cable end :============== == ==~
adj uster on the lever .
Turning the cable end adj us t er in direction A w ill
increase free play and turning it in direction B will
decrease free play.
If the adjus ter is threaded out near i ts limit or the
correct free play cannot be reached, turn the
adj u ster all the way in and back out one turn and
make the adjustment with the in-line cable adjus ter.
CABLE END ADJUS TE R

Honda 2004 CRF250X Specifications

General

Brand	Honda
Model	2004 CRF250X
Category	Motorcycle
Language	English