Honda 2004 CRF250X Service Manual

NUTS, BOLTS, FASTENERS
Check that all chassis n uts and bolts are ti ghtened to
their correct torque values (page 1-13).
Check that all safety clips, hose clamps and cable
stays are in place and properly secured.
WHEELS/TIRES
Tire pressure
should be
checked
when the tires are
cold
Raise the front whee l off the ground by placing a
work stand or equivalent under the engine .
Hold the front fork leg and move the front whee l
sideways with force to see if the wheel bearings are
worn.
Raise the rear wheel o ff the ground by placing a
workstand or equivalent under the engine .
Hold the swingarm and move the fear wheel side-
ways with force to see if the whee l bearings are
worn.
Check the tires for cuts, embedded nails, or other ::1
damage.
Check the followi ng :
-
front wheel (page 1 3-3) "'r-~,J
- rear wheel ( page 14-3) •
Check the cold tire pressur e.
TIRE PRESSURE:
FRONT: 98 kPa (1.0 kgf /c m 2, 14 psi)
REAR : 98 kPa (1 .0 kgf /c m 2, 14 psi)
MAINTENANCE
1
-
3-33

Honda 2004 CRF250X Specifications

General

Brand	Honda
Model	2004 CRF250X
Category	Motorcycle
Language	English