Honda 2004 CRF250X Service Manual

Install the dust cover tightly against the headlight
unit with its " TOP " mark facing up .
Install the front visor (page 2-5).
REMOVAL/INSTALLATION
Remove the front visor (page 2-5).
Remove the vertical beam adjusting screw, spring,
mounting screws, clamp and headlight unit.
Install the headlight unit in the reverse order of
removal.
TORQUE:
Headlight mo unting screw :
0.7 N·m (0.07 kgf- m, 0.5 Ibf.ft)
Adjust the headlight aim (page 3-28),
TAIL LIGHT
INSPECTION
Stafllhe engine and check the t aillight ill um ina ti on.
If any LED does not turn on , replace the tail light
unit .
LIGHTS/METER/SWITCHES
"TOP· MARK
"ADJUSTING SCREW ! CLAMP~ .n
UNIT
19-5

Honda 2004 CRF250X Specifications

General

Brand	Honda
Model	2004 CRF250X
Category	Motorcycle
Language	English