Honda 2004 CRF250X Service Manual

Remove the bearing retainer using the special tools.
TOOLS:
Retainer wrench, 48 x 15 mm 07YMA·KZ40100 or
07HMA·KS70100
(U.S.A.
only)
Retainer wrench body 07710·0010401
Install
the remover head into the bearing.
From the opposite side
of the wheel, install the
remover shaft and dr ive the bearing out of the
wheel hub.
Remove the distance
collar and drive out the bear-
ings.
TOOLS:
Bearing remover head, 25 mm 07746·0050800
Bearing remover shaft 07GGO·0010l00
• Never install the old bearings; once the bearing
have been removed, they
must be replaced with
new ones .
•
Replace the bearings in pairs.
ASSEMBLY
BRAKE DI SC BOLT
BRAKE DISC NUT
REAR WHEEL/SUSPENSION
16 N·m (1.6 kgf·m, 12Ibf·ft)
RIGHT SIDE COLLAR
RETAINER
44 N'm (4.5 kgf·m, 33 Ibf·ft)
~ ....
DISTANCE COLLAR
BRAKE DI SC
12 N·m (1.2 kgf·m, 9lbHt)
DR I VEN SPROCKET NUT
32
N'm (3.3 kg f·m, 24 Ibf·ft)
DRIVEN SPROCKET
17 O'~ FT SIDE COLLAR
Qota I r"nf
M" (
LEFT WHEEL . a
BEARINGS
LEFT DUST SEAL
~"""111
14-9

Honda 2004 CRF250X Specifications

General

Brand	Honda
Model	2004 CRF250X
Category	Motorcycle
Language	English