91
Making Measurements
Measuring Frequency
Measuring Frequency
Description The signal frequency and the amount of offset from the standard rate can
be measured to give an indication of probability of errors.
HOW TO: 1 Connect the signal to be measured to the IN port of the PDH module
(PDH) or the IN port of the SDH/SONET module (SONET electrical)
or the IN port of the Optical module.
NOTE The frequency measurement is always available even if the test timing is
off.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
