106
Making Measurements
Making ATM Measurements
Making ATM Measurements
Description Received cells, non conforming cells, HEC errors and 1pt Cell Delay
Variation are measured in-service and out-of -service. Lost cells,
missinserted cells, payload errors and 2pt Cell Delay Variation are
measured out-of -service. If you are measuring 2-point CDV the
foreground payload must be the test cell.
1 Set up the PHYSICAL LAYER interface, see.
2 Select ATM LAYER, see page 104.
3 If SHORT TERM results are required, use
to select the short term period.
4 You can view the ATM results on the
or display.
NOTE The measurement will not be affected if you switch between the different
results provided.
RECEIVE
ATM
RECEIVE
ATM
RESULTS
TIMING CONTROL
RESULTS
ATM CUMULATIVE
SHORT TERM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
