59
Selecting Test Features
Adding Errors & Alarms at the SONET Interface
Adding Errors & Alarms at the SONET
Interface
Description Errors and alarms can be added to the SONET interface signal during
testing.
HOW TO: 1 Set up the SONET transmit interface and payload required.
2 Choose the ERROR ADD TYPE and RATE required. If CV-L B2 errors
are added the RATE field offers ERROR ALL, selectable rates and
MSP THRESHOLD. When MSP THRESHOLD is selected the number
of errors and time period are selectable.
3 Choose the ALARM TYPE.
Errors and Alarms can be added at the same time.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
