EasyManuals Logo
Home>HP>Switch>5830 series

HP 5830 series User Manual

HP 5830 series
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #120 background imageLoading...
Page #120 background image
113
Ste
p
Command
Remarks
2. Perform a manual
version rollback.
issu rollback slot slot-number
Optional.
By default, automatic rollback is performed to revert
to the previous version.
The slot-number argument provided in this
command must be the same as that specified in the
issu load command.
Displaying and maintaining ISSU
Task Command
Remarks
Display information about the
rollback timer.
display issu rollback-timer [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display the ISSU state. display issu state Available in any view.
Display version compatibility
information.
display version comp-matrix [ file
upgrading-filename ]
Available in any view.
ISSU upgrade example
Network status
As shown in Figure 42, access layer switches Switch A, Switch B, and Switch C connect to user networks.
Distribution layer switches Switch D, Switch E, and Switch form an IRF fabric. The member ID of the master
is 1, and those of the subordinate switches are 2 and 3.
To ensure high availability, configure cross-device link aggregation using the following guidelines so
every three physical links with the same color between the IRF member switches and access switches are
aggregated as one logical link:
On the IRF fabric, create three dynamic aggregation groups. Ports in aggregation group 1 connect
to Switch A, ports in aggregation group 2 connect to Switch B, and ports in aggregation group 3
connect to Switch C.
On Switch A, create aggregation group 1 that corresponds to aggregation group 1 on the IRF
fabric.
On Switch B, create aggregation group 2 that corresponds to aggregation group 2 on the IRF
fabric.
On Switch C, create aggregation group 3 that corresponds to aggregation group 3 on the IRF
fabric.
Network requirements
The current system software image on each IRF member switch is soft-version1.bin. The new system
software image soft-version2.bin is saved on the TFTP server. The IP address of the IRF fabric is 1.1.1.1/24,
and that of the TFTP server is 2.2.2.2/24. The IRF fabric and the TFTP server can reach each other.
Use ISSU to upgrade system software of the IRF member switches to avoid traffic interruption.

Table of Contents

Other manuals for HP 5830 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 5830 series and is the answer not in the manual?

HP 5830 series Specifications

General IconGeneral
BrandHP
Model5830 series
CategorySwitch
LanguageEnglish

Related product manuals