EasyManuals Logo
Home>HP>Switch>5830 series

HP 5830 series User Manual

HP 5830 series
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #97 background imageLoading...
Page #97 background image
90
Ste
p
Command
Remarks
1. Create the configuration
archive directory.
See "Managing the file system."
In an IRF fabric, create the
direc
tory at least on the master.
2. Enter system view.
system-view N/A
3. Configure the directory and
file name prefix for archiving
the running configuration.
archive configuration location
directory filename-prefix
filename-prefix
Do not include member ID
information in the directory
name.
By default, no path or file name
prefix is set for configuration
archives, and the system does
not regularly save configuration.
IMPORTANT:
The undo form of this command
disables both manual and
automatic configuration
archiving, restores the default
settings for the archive
configuration interval and
archive configuration max
commands, and deletes all
saved configuration archives.
4. Set the maximum number of
configuration archives.
archive configuration max file-number
Optional.
The default number is 5.
Change the setting depending
on the amount of available
storage space.
Enabling automatic configuration archiving
To avoid decreasing system performance, follow these guidelines when you configure automatic
configuration archiving:
If the device configuration does not change frequently, manually archive the running configuration
as needed.
If the device configuration changes frequently, archive the running configuration manually, or
configure automatic archiving with an interval longer than 1440 minutes (24 hours).
Make sure you have set an archive path and file name prefix before performing this task.
To enable automatic configuration archiving:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enable automatic
configuration archiving and
set the archiving interval.
archive configuration interval minutes
By default, this function is
disabled.
To view configuration archive
names and their archiving time,
use the display archive
configuration command.

Table of Contents

Other manuals for HP 5830 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 5830 series and is the answer not in the manual?

HP 5830 series Specifications

General IconGeneral
BrandHP
Model5830 series
CategorySwitch
LanguageEnglish

Related product manuals