I
-
I
-
General
Compatibility
HP 83751 and HP 83752 sweepers are compatible with HP 8757 scalar
analyzers, and HP
8970B
noise figure meters.
Programming
HP 83751 and HP 83752 sweepers are fully compatible with the Standard
Commands for Programmable Instruments
(SCPI)
language. SCPI complies
with IEEE 488.2-1987. HP 8350 mnemonics have also been implemented to
provide compatibility with ATE systems which include an HP
8350B
sweeper.
Master/Slave
(two-tone)
Measurements
17-15
Two HP 83750 series sweepers can synchronously track each other over
swept or stepped frequencies at any
Iixed-
or swept-frequency offset with
limitations. Refer to Chapter 6, “Operating a Master/Slave Setup,” for
information on instrument setups and operation.
To Next Page
Loading...
General