MODEL
8559A
REPLACEABLE
PARTS
SECTION VI
REPLACEABLE PARTS
6-1.
INTRODUCTION
The replaceable parts list breakdown for each
6-5. The following information is listed for each
part:
1.
The Hewlett-Packard part number.
major assembl
y
is located in Section VIII, following
2.
The
part
number check
digit
(CD).
the circuit description for the assembly. This section
contains
information for ordering the replacement
.
The
total
quantity
(Qty)
in
the
instrument.
This
parts not listed in Section VIII. Table 6-1 includes a
quantity is given only once, at the first
appear-
list of reference designations and a list of abbrevia-
ance of the part in the list.
tions used in the parts list. Table 6-2 lists names and
addresses that correspond to the manufacturer code
4.
The
description
of
the
part.
numbers in the parts list. Table 6
-
3 lists the replace-
able parts in
alp-ha-numerical order by reference des-
5.
A
five-digit
code
indicating
a
typical manufac-
ignation.
turer of the part.
6-3.
REPLACEABLE PARTS LIST
6-4. Table 6-3, the list of replaceable parts, is orga
-
nized
as
follows:
1.
Major assemblies and their part numbers.
2.
Accessories supplied and their part numbers.
3.
Miscellaneous chassis parts and their part num
-
bers.
4.
Mechanical chassis parts and their part num-
bers.
6. The manufacturer's part number.
6-6.
ORDERING INFORMATION
6
-
7. To order a part listed in the replaceable parts
table, quote the Hewlett-Packard part number (with
check digit), indicate the quantity required, and
address the order to the nearest Hewlett-Packard
office. The check digit will ensure accurate and
timely processing of your order.
6-8.
To order a part that is not listed in the replace-
able parts table, include the instrument model num-
ber, instrument serial number, the description
and
function of the part, and the number of parts
required. Address the order to the nearest
Hewlett-
Packard office.
To Next Page
Loading...
Need help?
General
