HP A5800 Series Installation Guide

80
A5800AF-48G panel views
Figure 77 Front panel
(1) 10/100/1000Base-T auto-sensing Ethernet port
(2) 10/100/1000Base-T Ethernet port LED
(3) SFP+ port
(4) Seven-segment LED
(5) Port LED mode switching button
(6) Port mode LED
(7) System status LED (SYS)
(8) SFP+ port LED
Figure 78 Rear panel
(1) Grounding screw (auxiliary grounding point 2)
(2) Management Ethernet port
(3) Console port
(4) Fan tray slot 1
(5) Fan tray slot 2
(6) Power supply slot 1
(7) Power supply slot 2
(8) LINK LED for the management Ethernet port
(9) ACT LED for the management Ethernet port
(10) USB port
NOTE:
 The A5800AF-48G switch comes with the power supply slots empty and the filler modules for the slots as
accessory. You can install one or two power supplies for the switch as needed. In this figure, two 650W AC
power supplies are installed.
 The A5800AF-48G switch also comes with the fan tray slots empty. You must install two fan trays for the
A5800AF-48G for adequate heat dissipation, and their models must be the same. In this figure, two
LSWM1FANSC fan trays are installed.

HP A5800 Series Specifications

General

Brand	HP
Model	A5800 Series
Category	Switch
Language	English