HP A5800 Series Installation Guide

51
Changing the startup mode
The system by default starts up in normal (full) mode. To change the startup mode to fast, press Ctrl + B
within five seconds to enter the Boot menu:
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify BootRom password
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set BootRom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Enter 9 to change the startup mode.
The current mode is full startup mode!
Are you sure you want to change it to fast startup mode? Yes or No (Y/N):
Enter Y at the prompt.
Setting...done!
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify BootRom password
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set BootRom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Enter 0 at the prompt. The system reboots in fast startup mode and displays the following information:
Starting......
********************************************************************************
* *
* HP A5800AF-48G Switch BOOTROM, Version 212 *
* *
********************************************************************************
Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P.

HP A5800 Series Specifications

General

Brand	HP
Model	A5800 Series
Category	Switch
Language	English