HP A5800 Series Installation Guide

86
NOTE:
The A5820X-24XG-SFP+ and A5820X-24XG-SFP+ TAA switches come with power supply slot 1 empty
and power supply slot 2 covered by a filler panel. You can install one or two power supplies for your
switch as needed. In this figure, two PSR300-12A AC power supplies are installed in the slots.
A5820X-14XG-SFP+ (2 slots)/A5820X-14XG-SFP+
TAA (2 slots) panel views
Figure 91 Front panel
(1) Expansion interface card slot
(2) Seven-segment LED
(3) Port mode LED
(4) System status LED (SYS)
(5) Power supply 1 status LED (PWR1)
(6) Power supply 2 status LED (PWR2)
(7) OAP card status LED (SLOT3)
(8) Port mode LED switching button
(9) USB port
(10) Console port
(11) 10/100/1000Base-T auto-sensing Ethernet port
(12) 10/100/1000Base-T Ethernet port LED
(13) SFP+ port
(14) SFP+ port LED
NOTE:
The A5820X-14XG-SFP+ (2 slots) and A5820X-14XG-SFP+ TAA (2 slots) switches come with the
expansion interface card slots covered by filler panels. In this figure, two LSW1SP4P0 interface cards
are installed in the slots.

HP A5800 Series Specifications

General

Brand	HP
Model	A5800 Series
Category	Switch
Language	English