HP A5800 Series Installation Guide

83
A5800-24G-SFP (1 slot)/A5800-24G-SFP TAA (1
slot) panel views
Figure 84 Front panel
(1) Interface card slot
(2) 100/1000Base-X SFP port
(3) 100/1000Base-X SFP port LED
(4) Seven-segment LED
(5) Port mode LED
(6) SFP+ port LED
(7) Logo plate (A console port and a USB port are
under this logo plate)
(8) System status LED (SYS)
(9) Power supply 1 status LED (PWR1)
(10) Power supply 2 status LED (PWR2)
(11) SFP+ port
(12) Port LED mode switching button
To use the console port and USB port, open the logo plate, as shown in Figure 72 and Figure 73.
NOTE:
The A5800-24G-SFP (1 slot) and A5800-24G-SFP TAA (1 slot) switches come with the expansion
interface card slot covered by a filler panel. In this figure, an LSW1SP4P0 interface card is installed in
the slot.
Figure 85 Rear panel
(1) Power supply slot 1
(2) Power supply slot 2
(3) Hot swappable fan tray
(4) Management Ethernet port
(5) Grounding screw
(6) ACT LED for the management Ethernet port
(7) LINK LED for the management Ethernet port

HP A5800 Series Specifications

General

Brand	HP
Model	A5800 Series
Category	Switch
Language	English