To Next Page

To Previous Page

HP P2000 G3 MSA System CLI Reference Guide 117

reset disk-error-statistics

Description Resets error statistics for all or specified disks. Statistics that are reset include:

• Number of SMART events recorded

• Number of I/O timeouts accessing the disk

• Number of times the disk did not respond

• Number of attempts by the controllers to spin up the disk

• Number of media errors (errors generated by the disk as specified by its manufacturer)

• Number of non-media errors (errors generated by the controllers or by the disk and not

categorized as media errors)

• Number of block reassignments

• Number of bad blocks found

To reset other disk statistics, use the reset disk-statistics command.

Syntax

reset disk-error-statistics [disks]

Parameters disks

Optional. IDs of the disks to reset statistics for. For disk syntax, see Command syntax on page 22. If

this parameter is omitted, statistics are reset for all disks.

Example Reset error statistics for disks 1.1 and 2.1:

# reset disk-error-statistics 1.1,2.1

Success: Command completed successfully. (2012-01-21 11:35:34)

HP P2000 G3 Cli Reference Guide

Other manuals for HP P2000 G3