HP P2000 G3 Cli Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 423
job-parameters
Properties
Example
# show job-parameters
...
<OBJECT basetype="job-parameters" name="job-parameters" oid="1" format="pairs">
<PROPERTY name="background-scrub" type="string">Disabled</PROPERTY>
<PROPERTY name="background-scrub-numeric" type="string">0</PROPERTY>
<PROPERTY name="background-scrub-pool" type="string">Disabled</PROPERTY>
<PROPERTY name="background-scrub-pool-numeric" type="string">0</PROPERTY>
<PROPERTY name="partner-firmware-upgrade" type="string">Disabled</PROPERTY>
<PROPERTY name="partner-firmware-upgrade-numeric" type="string">0</PROPERTY>
<PROPERTY name="utility-priority" type="string">High</PROPERTY>
Table 45 job-parameters properties
Name Type Description
background-
scrub
string Shows whether disks in vdisks are automatically checked for disk defects to
ensure system health. The interval between background vdisk scrub finishing and
starting again is 24 hours.
• Disabled: Background vdisk scrub is disabled.
• Enabled: Background vdisk scrub is enabled. This is the default.
background-
scrub-numeric
string Numeric equivalents for background-scrub values.
• 0: Disabled
• 1: Enabled
background-
scrub-pool
string Not applicable.
background-
scrub-pool-
numeric
string Not applicable.
partner-
firmware-
upgrade
string Shows whether component firmware versions are monitored and will be
automatically updated on the partner controller.
• Disabled: Partner firmware upgrade is disabled.
• Enabled: Partner firmware upgrade is enabled. This is the default.
partner-
firmware-
upgrade-numeric
string Numeric equivalents for partner-firmware-upgrade values.
• 0: Disabled
• 1: Enabled
utility-
priority
string Priority at which data-redundancy utilities, such as vdisk verify and reconstruct,
run with respect to I/O operations competing for the system’s processors. (This
does not affect vdisk background scrub, which always runs at “background”
priority.)
• High: Utilities have higher priority than host I/O. Use when your highest
priority is to return the system to a fully fault-tolerant state. This can cause
heavy I/O to be slower than normal. This is the default.
• Medium: Utility performance is balanced with host I/O performance.
• Low: Utilities run at a slower rate with minimal effect on host I/O. Use when
streaming data without interruption, such as for a web server, is more
important than data redundancy.
utility-
priority-
numeric
string Numeric equivalents for utility-priority values.
• 0: High
• 1: Medium
• 2: Low

HP P2000 G3 Specifications

General

Brand	HP
Model	P2000 G3
Category	Storage
Language	English