To Next Page

To Previous Page

HP P2000 G3 MSA System CLI Reference Guide 141

set chap-record

Description For iSCSI, changes an originator’s CHAP record. You can change the record’s secret, mutual name,

and mutual secret values. This command is permitted whether or not CHAP is enabled.

Syntax

set chap-record

name originator-name

[secret originator-secret]

[mutual-name recipient-name mutual-secret recipient-secret]

Parameters name originator-name

The originator name, typically in IQN format.

secret originator-secret

The secret that the recipient uses to authenticate the originator. The secret is case sensitive and can

include 12–16 bytes.

mutual-name recipient-name

Optional; for mutual CHAP only. The recipient name, typically in IQN format. The name can have a

maximum of 223 bytes, including 0–9, lowercase a–z, hyphen, colon, and period. To determine a

storage system’s IQN, use the show ports command to view an iSCSI port Target ID value. This

parameter and mutual-secret must be set together.

mutual-secret recipient-secret

Optional; for mutual CHAP only. The secret that the originator uses to authenticate the recipient. The

secret is case sensitive, can include 12–16 bytes, and must differ from the originator secret. A storage

system’s secret is shared by both controllers. This parameter and mutual-name must be set

together.

Example For mutual CHAP, add a recipient name and secret to a CHAP record:

# set chap-record name iqn.1991-05.com.microsoft:myhost.domain mutual-name

iqn.1995-03.com.acme:01.storage.00c0ffd6000a mutual-secret ABCdef123456

Success: Command completed successfully.

(iqn.1991-05.com.microsoft:myhost.domain) - The CHAP record was changed.

(2012-01-21 11:54:33)

HP P2000 G3 Cli Reference Guide

Other manuals for HP P2000 G3