EasyManuals Logo
Home>HP>Storage>P2000 G3

HP P2000 G3 Cli Reference Guide

HP P2000 G3
532 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #385 background imageLoading...
Page #385 background image
HP P2000 G3 MSA System CLI Reference Guide 385
drive-parameters
Properties
Table 24 drive-parameters properties
Name Type Description
smart string Shows whether SMART (Self-Monitoring Analysis and Reporting Technology) is
enabled or disabled for disks.
• Detect-Only: Each disk in the system retains its individual SMART setting,
as will new disks added to the system.
• Enabled: SMART is enabled for all disks in the system and will be enabled
for new disks added to the system. This is the default.
• Disabled: SMART is disabled for all disks in the system and will be
disabled for new disks added to the system.
smart-numeric string Numeric equivalents for smart values.
• 0: Detect-Only
• 1: Enabled
• 2: Disabled
drive-write-
back-cache
string • Disabled: Disk write-back cache is disabled for all disks in the system and
will be enabled for new disks added to the system. This parameter cannot
be changed.
drive-write-
back-cache-
numeric
string Numeric equivalents for drive-write-back-cache values.
• 0: Detect-Only
• 1: Enabled
• 2: Disabled
drive-timeout-
retry-max
uint8 Maximum number of times a timed-out I/O operation can be retried before the
operation is failed. The default is 3.
drive-attempt-
timeout
uint8 Number of seconds before an I/O operation is aborted and possibly retried.
The default is 8 seconds.
drive-overall-
timeout
uint8 Total time in seconds before an I/O operation is failed regardless of the
drive-attempt-timeout and drive-timeout-retry-max settings. The
default is 105 seconds.
disk-dsd-enable string Shows whether available disks and global spares will spin down after a period
of inactivity shown by the disk-dsd-delay property.
• Disabled: Drive spin down for available disks and global spares is
disabled. This is the default.
• Enabled: Drive spin down for available disks and global spares is
enabled.
disk-dsd-
enable-numeric
string Numeric equivalents for disk-dsd-enable values.
• 0: Disabled
• 1: Enabled
disk-dsd-
enable-pool
string Not applicable.
disk-dsd-
enable-pool-
numeric
string Not applicable.

Table of Contents

Other manuals for HP P2000 G3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP P2000 G3 and is the answer not in the manual?

HP P2000 G3 Specifications

General IconGeneral
BrandHP
ModelP2000 G3
CategoryStorage
LanguageEnglish

Related product manuals