482 XML API basetype properties
max-snapshot-
groups-per-pool
uint32 Not applicable.
max-snapshots-
per-snapshot-
group
uint32 Not applicable.
max-midline-
per-storage-
pool
uint32 Not applicable.
max-standard-
per-storage-
pool
uint32 Not applicable.
max-
performance-
per-storage-
pool
uint32 Not applicable.
local-
controller
string Controller you are currently logged in to.
• A: Controller A.
• B: Controller B.
local-
controller-
numeric
string Numeric equivalents for local-controller values.
• 0: B
• 1: A
serial-number string Last five digits of the midplane serial number.
external-
targetid-
control
string Not used.
external-
targetid-
control-numeric
string Not used.
lan-heartbeat string Not used.
lan-heartbeat-
numeric
string Not used.
ip-address-mode string • CAPI_TWO_IP_ADDRESSES_MODE: Dual controller system has a unique
IP address for each controller.
• CAPI_ONE_IP_ADDRESS_MODE: Dual controller system has the same IP
address for both controllers, only one active at a time.
ip-address-
mode-numeric
string Numeric equivalents for lan-heartbeat values.
• 0: CAPI_TWO_IP_ADDRESSES_MODE
• 1: CAPI_ONE_IP_ADDRESS_MODE
debug-flags uint32 For use by service personnel.
enclosure-flags uint32 For internal use only.
num-global-
spares
uint32 Number of global-spare disks defined in the storage system.
dynamic-spare-
rescan-rate
uint32 Interval at which the system is scanned for disks automatically designated as
spares, if the dynamic spares feature is enabled.
performance-
tuning-flags
string For internal use only.
Table 80 system-parameters-table properties (continued)
Name Type Description
To Next Page
Loading...
Need help?
General