HP P2000 G3 Cli Reference Guide

HP P2000 G3 MSA System CLI Reference Guide 43
convert master-to-std
Description Converts a specified master volume into a standard volume; that is, it disables the volume from
accepting snapshots. If the specified volume has associated snapshots, you must delete the snapshots
before converting the volume.
Syntax
convert master-to-std master-volume
Parameters master-volume
Name or serial number of the master volume to convert. For volume syntax, see Command syntax on
page 22.
Example Convert a master volume having no snapshots to a standard volume:
# convert master-to-std MV1
Success: Command completed successfully. (MV1) - The conversion of a master
volume to a standard volume completed. (2012-01-18 12:35:54)
See also • delete all-snapshots
• show master-volumes

HP P2000 G3 Specifications

General

Brand	HP
Model	P2000 G3
Category	Storage
Language	English