222 Alphabetical list of commands
show email-parameters
Description Shows email (SMTP) notification parameters for events and managed logs.
Syntax
show email-parameters
Output Email Notification
• Disabled: Email notification is disabled. This is the default.
• Enabled: Email notification is enabled.
Email Notify Filter
Shows the minimum severity for which the system should send event notifications:
• crit: Sends notifications for Critical events only.
• error: Sends notifications for Error and Critical events.
• warn: Sends notifications for Warning, Error, and Critical events.
• info: Sends notifications for all events.
• none: Disables email notification and clears the settings. This is the default.
This parameter does not apply to managed-logs notifications.
Email Address (1–3)
Shows up to three email addresses for recipients of event notifications.
Log Destination
Shows the email address for the log collection system used by the managed logs feature.
Email Server
The IP address of the SMTP mail server to use for the email messages.
Email Domain
The domain name that, with the sender name, forms the “from” address for remote notification.
Email Sender
The sender name that, with the domain name, forms the “from” address for remote notification.
Include Logs
Shows whether system log files will automatically be attached to email notification messages
generated by the managed logs feature. This is the “push” mode for managed logs.
This option is
disabled by default.
Example Show settings for email notification:
# show email-parameters
Email Parameters (SMTP)
-----------------------
Email Notification: Enabled
Email Notify Filter: warn
Email Address 1: sysadmin@mydomain.com
Email Address 2:
Email Address 3:
Log Destination: logCollector@mydomain.com
Email Server: 10.1.1.10
Email Domain: mydomain.com
Email Sender: RAIDsystem
Include Logs: Disabled
Success: Command completed successfully. (2012-01-18 12:51:04)
To Next Page
Loading...
Need help?
General