266 Alphabetical list of commands
show remote-systems
Description Shows information about remote systems associated with the local system.
Syntax
show remote-systems [system]
Parameters system
Optional. Name or network-port IP address of a specific remote system.
Example Show information about remote system System2:
# show remote-systems System2
Remote System
-------------
System Name: System2
System Contact: J. Smith
System Location: Denver lab
System Information: Uninitialized Info
Vendor Name: vendor
Product ID: product
Product Brand: brand
IP Address Controller A: 10.122.1.21
IP Address Controller B: 10.122.1.22
Username: manage
Status: Connected
Last Connected: 2012-01-18 12:58:15
Success: Command completed successfully. (2012-01-18 15:14:23)
Basetypes • remote-system
• status
See also • create remote-system
• delete remote-system
• remote
• set remote-system
To Next Page
Loading...
Need help?
General