Return to the FTP view.
----End
8.5.7 Checking the Configuration
After the configurations for accessing other devices using FTP are complete, you can view the
source parameters configured on the FTP client.
Prerequisites
The configurations for accessing other devices using FTP are complete.
Procedure
l Run the display ftp-client command to view the source parameters of the FTP client.
----End
Example
Run the display ftp-client command to view the source parameters of the FTP client.
<Huawei> display ftp-client
Info: The source address of FTP client is 1.1.1.1.
8.6 Accessing Files on Another Device Using SFTP
SFTP is a secure FTP service. After the router is configured as an SFTP client, the SFTP server
authenticates the client and encrypts data in both directions to provide secure data transmission.
8.6.1 Establishing the Configuration Task
Before configuring the use of SFTP to access files on another device, familiarize yourself with
the applicable environment, complete the pre-configuration tasks, and obtain any data required
for the configuration. This will help you complete the configuration task quickly and correctly.
Applicable Environment
SFTP is a secure FTP protocol. SFTP is based on SSH. It allows users to log in to a remote
device and transmit or manage files securely. You can log in to a remote SSH server from the
router that functions as an SFTP client.
Pre-configuration Tasks
Before configuring the use of SFTP to access files on another device, complete the following
tasks:
l Configuring a reachable route between the client and SSH server
Data Preparation
To use SFTP to access files on another device, you need the following data:
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 8 Accessing Another Device
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
163
To Next Page
Loading...
Need help?
General
